top of page

Expert Tips on How to Properly Change Brake Fluid

Brake fluid is an indispensable part of your vehicle's braking system. When you press the brake pedal, the fluid pressure activates the brakes. Over time, the fluid can become contaminated with dirt and moisture, reducing its ability to work correctly. That's why it's essential to change your brake fluid regularly.


In your car, it helps to transfer force from the brake pedal to the brakes themselves, and it also helps to keep the brakes cool. Over time, brake fluid can become dirty and needs to be changed.


Here are some expert tips on how to properly change brake fluid:


1. Make sure you have the right tools. You'll need a clean work surface, fresh brake fluid, a funnel, and gloves.


2. Check your owner's manual to determine what brake fluid your vehicle uses.


3. Bleed the brakes before you start. This will help remove any air bubbles from the system.


4. Remove the old brake fluid. Use a clean, dry cloth to remove dirt and grime from the reservoir. Then, open the bleeder valves and let the old fluid drain out. Once the brakes are bled, open the bleeder valves and allow the old fluid to drain into the catch basin. Clean the reservoir thoroughly before adding the new brake fluid.


5. Add the new brake fluid. Pour the new fluid into the reservoir using the funnel. Make sure you don't overfill it.


6. Bleed the brakes again. Repeat the previous steps until you've bled all the brakes. This will help eliminate any air bubbles in the new fluid.


7. Check the level of the fluid regularly. Ensure it's at the proper level so that your brakes are always ready to go. You don't want to let the level get too low, as this can cause damage to the system.


8. Test drive the vehicle to make sure the brakes are working correctly.


9. Changing brake fluid is an essential part of maintaining your vehicle. By following these tips, you can be sure that your brake fluid is adequately changed and that your brakes will be in good working order.


Why Should You Properly Change Your Brake Fluid?


Your brakes are one of your car's most important safety aspects, so keeping them in good working order is essential. That includes ensuring your brake fluid is fresh and at the right level.


Brake fluid is a hydraulic fluid that helps transfer the force from your brake pedal to the brake pads, stopping the wheels from turning. Over time, brake fluid can contaminate water and other debris, reducing its effectiveness. That’s why it’s essential to change your brake fluid according to your motorbike service schedule.


There are several other good reasons to change your brake fluid:


  1. Doing so can help improve your brakes’ performance.

  2. It can extend the life of your brake system components.

  3. It can help prevent corrosion in your brake system.

  4. It can make your car easier to stop in an emergency.

  5. It can improve the feel of your brake pedal.


If you’re due for a brake fluid shift or experiencing any brake problems, take your car to a qualified mechanic for motorbike service in the UK.


Conclusion


Changing your brake fluid is vital in maintaining the safety and performance of your brakes. Remember a few things when changing your brake fluid, such as using the proper type of fluid and bleeding the brakes properly. These tips will help ensure that your brakes are in the correct working order.


York Motorbikes is an excellent company that offers its customers a fast, efficient turnaround while maintaining high standards. We pride ourselves on providing an exceptional professional experience. If you're considering an excellent motorbike service in the UK, contact York Motorbikes today.




1 view0 comments
bottom of page